TM 5-3825-270-23&P
FIELD MAINTENANCE
WATER TANK MOUNT BUSHINGS AND SPRING REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Kit, Tank Install Rubber Mount (WP 0226, Table 1,
Tool Kit, General Mechanic's: Automotive
Item 53) Qty: 1
(WP 0225, Table 1, Item 12)
Kit, Tank Install Springs (WP 0226, Table 1, Item
Bit, Screwdriver 3/4 in (19mm) (WP 0225, Table 1,
52) Qty: 1
Item 1)
Bag, Air Lifting (WP 0225, Table 1, Item 2)
Block, Filler, Wood, 3 in. Thick (WP 0225, Table 1,
Personnel Required
Item 2)
Construction Equipment Repairer 91L (2)
Lifting Device, Capacity 8,500 lbs (3,855 kg)
Sling (WP 0225, Table 1, Item 9)
References
Wrench, Torque, 50-250 lb-ft (68-339 Nm), 1/2 in.
Drive (WP 0225, Table 1, Item 15)
Parts Manual (WP 0220) Figure 4002
Wrench, Torque, 90-600 lb-ft (122-813 Nm), 3/4 in.
Drive (WP 0225, Table 1, Item 16)
Equipment Condition
Water tank drained. (TM 5-3825-270-10)
Materials/Parts
Strainer housing removed. (WP 0182)
Tags, Identification, White (WP 0224, Table 1, Item
Inlet valve and hose removed. (WP 0183)
54)
Stowage box removed. (WP 0154)
Locknut (WP 0226, Table 1, Item 56) Qty: 2
Battery box removed. (WP 0083)
Locknut (WP 0226, Table 1, Item 67) Qty: 24
Valve V1 removed. (WP 0158)
Valve V8 removed. (WP 0159)
Folding hand rail assembly removed. (WP 0185)
Rear platform removed. (WP 0162)
REMOVAL
1.
Remove two locknuts (Figure 1, Item 1) and wire harness (Figure 1, Item 4) from water tank (Figure 1, Item
3).
0193-1