TM 5-3825-270-23&P
FIELD MAINTENANCE
REAR PLATFORM REPLACEMENT
INITIAL SETUP:
References
Tools and Special Tools
Parts Manual (WP 0220) Figure 4016
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4018
(WP 0225, Table 1, Item 12)
Sling (WP 0225, Table 1, Item 9)
Lifting Device, 150 lbs capacity
Equipment Condition
Batteries disconnected. (WP 0085)
Materials/Parts
Inlet valve and hose removed. (WP 0183)
Rear platform screen removed. (WP 0165)
Compound, Sealing, Loctite 242 (WP 0224, Table
Flusher nozzles and air actuators removed.
1, Item 19, 20, 21, 22)
Cable Ties (WP 0224, Table 1, Item 9)
Folding hand rail assembly removed. (WP 0185)
Tape, Duct (WP 0224, Table 1, Item 55)
Valve V7 handle removed. (WP 0180)
Locknut (WP 0226, Table 1, Item 54) Qty: 6
Valve V6 handle removed. (WP 0180)
Locknut (WP 0226, Table 1, Item 40) Qty: 5
Manual water turret removed. (WP 0163)
Personnel Required
Construction Equipment Repairer 91L (2)
REMOVAL
1.
Open control panel cover (Figure 1, Item 1) by releasing rubber T-handle (Figure 1, Item 2).
1
2
Figure 1. Rear Platform Removal.
CAUTION
Do not allow control panel to hang by wires. Failure to comply may result in damage to
equipment.
2.
Remove six screws (Figure 2, Item 3) and washers (Figure 2, Item 4) from main control box (Figure 2, Item 5)
and control panel (Figure 2, Item 6).