TM 5-3825-270-23&P
FIELD MAINTENANCE
FLUSHER NOZZLE AND AIR ACTUATOR REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4014
(WP 0225, Table 1, Item 12)
Equipment Condition
Materials/Parts
Air valve cover plate removed. (WP 0164)
Locknut (WP 0226, Table 1, Item 76) Qty: 18
Gasket (WP 0226, Table 1, Item 34) Qty: 2
REMOVAL
NOTE
Both right and left flusher nozzles are replaced the same way. Left side shown.
1.
Loosen six set screws (Figure 1, Item 3) and three collars (Figure 1, Item 2).
2
3
4
1
6
5
Figure 1. Flusher Nozzle Removal.
2.
Remove nozzle (Figure 1, Item 4) from elbow (Figure 1, Item 1).
3.
Remove elbow (Figure 1, Item 1) from elbow (Figure 1, Item 6).
4.
Remove four locknuts (Figure 2, Item 8), washers (Figure 2, Item 9), and two u-bolts (Figure 2, Item 10) from
manual water turret assembly (Figure 2, Item 7) and module (Figure 2, Item 11). Discard locknuts.