TM 5-3825-270-23&P
FIELD MAINTENANCE
FOLDING HAND RAIL ASSEMBLY REPLACEMENT
INITIAL SETUP:
References
Tools and Special Tools
Parts Manual (WP 0220) Figure 4049
Tool Kit, General Mechanic's: Automotive
(WP 0225, Table 1, Item 12)
Equipment Condition
Materials/Parts
Folding hand rail in stowed position. (TM
5-3825-270-10)
Locknut (WP 0226, Table 1, Item 54) Qty: 12
Personnel Required
Construction Equipment Repairer 91L (2)
REMOVAL
WARNING
Hand rail components are heavy. Use the aid of an assistant when moving and supporting
assembly during removal and installation. Joints between hand rail components create a
pinch point hazard. Take care not to catch fingers or hands in joints. Failure to comply may
result in serious injury or death of personnel.
NOTE
Both sides of folding hand rail assembly removed in the same way. Left side shown.
1.
Remove two locknuts (Figure 1, Item 4), six washers (Figure 1, Item 3), two screws (Figure 1, Item 1), and two
bearing sleeves (Figure 1, Item 2) from folding handrail assembly (Figure 1, Item 5) and upper walkway
assembly (Figure 1, Item 6). Discard locknuts.
0185-1