TM 5-3825-270-23&P
0183
REMOVAL - Continued
4
5
6
11
10
9
7, 8
1
Figure 2. Inlet Valve and Hose Removal.
3.
Remove eight locknuts (Figure 2, Item 7), screws (Figure 2, Item 8), inlet elbow (Figure 2, Item 5), gasket
(Figure 2, Item 9), inlet valve (Figure 2, Item 10), and gasket (Figure 2, Item 11) from tank (Figure 2, Item 4).
Discard locknuts and gaskets.
4.
Remove inlet elbow (Figure 2, Item 5) from inlet hose (Figure 2, Item 1).
5.
Remove inlet hose (Figure 3, Item 1) from discharge tube (Figure 3, Item 3).
1
3
Figure 3. Inlet Valve and Hose Removal.
END OF TASK
INSTALLATION
1.
Install inlet hose (Figure 4, Item 1) onto discharge tube (Figure 4, Item 3) with two clamps (Figure 4, Item 2).
Do not tighten clamps.