TM 5-3825-270-23&P
0182
REMOVAL - Continued
5.
Loosen two hose clamps (Figure 4, Item 20) and remove strainer housing (Figure 4, Item 4) from tube (Figure
4, Item 19).
6
24
25
Figure 4. Strainer Housing Removal.
END OF TASK
INSTALLATION
1.
Install strainer housing (Figure 5, Item 4) in tube (Figure 5, Item 19) with two hose clamps (Figure 5, Item 20).
Tighten clamps to 70 in-lbs (7.9 Nm).
6
24
25
Figure 5. Strainer Housing Installation.
NOTE
Perform Step (2) if mounting bracket was removed.
2.
Install mounting bracket (Figure 6, Item 15) on water tank assembly (Figure 6, Item 1) with two screws (Figure
6, Item 18), four flat washers (Figure 6, Item 17), and two locknuts (Figure 6, Item 16). Do not tighten locknuts.