TM 5-3825-270-23&P
FIELD MAINTENANCE
INLET VALVE AND HOSE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4014
(WP 0225, Table 1, Item 12)
Wrench, Torque, 40-200 lb-in (6-23 Nm), 3/8 in.
Equipment Condition
Drive (WP 0225, Table 1, Item 14)
Rear platform screen removed. (WP 0165)
Materials/Parts
Locknut (WP 0226, Table 1, Item 76) Qty: 8
Gasket (WP 0226, Table 1, Item 34) Qty: 2
REMOVAL
1.
Loosen two clamps (Figure 1, Item 2) from inlet hose (Figure 1, Item 1) and discharge tube (Figure 1 Item 3).
1
2
3
Figure 1. Inlet Valve and Hose Removal.
2.
Loosen two clamps (Figure 2, Item 6) on inlet hose (Figure 2, Item 1) and inlet elbow (Figure 2, Item 5).