TM 5-3825-270-23&P
0185
ASSEMBLY - Continued
2.
Install two midrail plates (Figure 9, Item 16) on two rear upright rails (Figure 9, Item 23) with two bearing sleeves
(Figure 9, Item 26), six washers (Figure 9, Item 27), two snap pin lanyards (Figure 9, Item 25), two screws
(Figure 9, Item 24), and two locknuts (Figure 9, Item 28).
24, 25, 26
27
28
16
23
Figure 9. Folding Hand Rail Assembly.
3.
Install two snap pins (Figure 10, Item 22) in two rear upright rails (Figure 10, Item 23).
22
23
Figure 10. Folding Hand Rail Assembly.
4.
Install upper rail (Figure 11, Item 21) on walkway pivoting rail (Figure 11, Item 15) with two bearing sleeves
(Figure 11, Item 19), six washers (Figure 11, Item 18), two screws (Figure 11, Item 20), and two locknuts
(Figure 11, Item 17).
