TM 5-3825-270-23&P
FIELD MAINTENANCE
STOWAGE BOX REPAIR
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Cable, Door Stop (WP 0226, Table 1, Item 46)
Tool Kit, General Mechanic's: Automotive
Qty: 15 in. (381 mm)
(WP 0225, Table 1, Item 12)
Stop, Sleeve (WP 0226, Table 1, Item 42) Qty: 4
Drill, Hand, VSR, Elec. (WP 0225, Table 1, Item
2)
Goggles, Industrial (WP 0225, Table 1, Item 2)
Personnel Required
Drill Bit Set Standard (WP 0225, Table 1, Item 2)
Construction Equipment Repairer 91L (2)
Tool Kit, Blind Rivets (WP 0225, Table 1, Item 2)
References
Materials/Parts
Parts Manual (WP 0220) Figure 4006
Rivet, Pop (WP 0226, Table 1, Item 44) Qty: 22
Seal, Toolbox (WP 0226, Table 1, Item 47) Qty: 94
in. (2,388 mm)
REMOVAL
1.
Unlatch two draw latches (Figure 1, Item 2) and open stowage box door (Figure 1, Item 4).
1
2
5, 6, 7
4
3
Figure 1. Stowage Box Removal.
2.
Remove six nuts (Figure 1, Item 5), twelve washers (Figure 1, Item 6), six screws (Figure 1, Item 7), and
stowage box (Figure 1, Item 1) from flat rack (Figure 1, Item 3).
END OF TASK
DISASSEMBLY
1.
Starting at seam, remove stowage box door seal (Figure 2, Item 5) from stowage box (Figure 2, Item 1). Discard
seal.