TM 5-3825-270-23&P
0099
WEATHERPACK CONNECTOR REPAIR - Continued
3
1
6
7
8
Figure 8. Seating Terminal to Connector.
11.
Push terminal (Figure 8, Item 6), wire seal (Figure 8, Item 7), and wire (Figure 8, Item 8) through connectors
(Figure 8, Item 1), and (Figure 8, Item 3) until seated.
12.
Close secondary lock (Figure 9, Item 2) on connector (Figure 9, Item 1), and (Figure 9, Item 3).
2
1
3
2
Figure 9. Close Connector Secondary Lock.
END OF TASK
WIRE REPAIR
NOTE
If 30 percent or more of wiring harness wires have been repaired or replaced, replace
complete harness.
1.
Access damaged wire (Figure 10, Item 1).