TM 5-3825-270-23&P
0099
WEATHERPACK CONNECTOR REPAIR - Continued
WARNING
Tip of removal tool is very sharp. Use care when using removal tool. Failure to comply may
result in injury or death to personnel.
2.
Insert terminal remover (Figure 5, Item 5) into cavity (Figure 5, Item 4) on connector (Figure 5, Item 1), and
(Figure 5, Item 3) until seated.
5
4
3
1
2
6
7
8
Figure 5. Connector Breakdown.
3.
Pull wire (Figure 5, Item 8), terminal (Figure 5, Item 6), and wire seal (Figure 5, Item 7) back through connectors
(Figure 5, Item 1), and (Figure 5, Item 3) and remove terminal remover (Figure 5, Item 5).
NOTE
Make cut directly behind damaged terminal.
4.
Cut and remove terminal (Figure 5, Item 6) and wire seal (Figure 5, Item 7) from wire (Figure 5, Item 8).
5.
Insert 1 in. (25 mm) of wire (Figure 6, Item 8) through wire seal (Figure 6, Item 7).
8
7
Figure 6. Wire With Seal.
