TM 5-3825-270-23&P
0099
WIRE SOLDER REPAIR
WARNING
Avoid breathing fumes generated from soldering. Various metals have potential to generate
hazardous atmospheres. Good ventilation is required. Eye protection is required. Failure to
comply may result in injury or death to personnel.
WARNING
Allow solder to cool prior to handling. Failure to comply may result in injury or death to
personnel.
NOTE
This method produces a stronger, more permanent repair. Use this method when possible.
1.
Remove damaged wire (Figure 12, Item 1) if necessary.
1
2
1
3
3
Figure 12. Before Joint Is Soldered.
2.
Remove 3/4 in. (19 mm) of insulation (Figure 12, Item 3) from end of both wires (Figure 12, Item 1).
3.
Slide 3 in. (76 mm) piece of heatshrink tubing (Figure 12, Item 2) over end of one wire (Figure 12, Item 1).
WARNING
Allow solder to cool prior to handling. Failure to comply may result in injury or death to
personnel.