TM 5-3825-270-23&P
FIELD MAINTENANCE
WORK LIGHTS DO NOT ILLUMINATE
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Work Light Harness Replacement (WP 0107)
Tool Kit, General Mechanic's: Automotive
Work Light Replacement (WP 0106)
(WP 0225, Table 1, Item 12)
Field Level Preventive Maintenance Checks And
Multimeter (WP 0225, Table 1, Item 4)
Services (PMCS) (WP 0069)
Tap & Die Set (Screwdriver) (WP 0225, Table 1,
No Power To Control Panel (WP 0027)
Item 2)
Water Distributor Operator Manual (TM
5-3825-270-10)
References
Battery Disconnect/Connection (WP 0085)
Control Panel Light Switch Replacement
Equipment Condition
Engine OFF. (TM 5-3825-270-10)
General Wire Harness Replacement (WP 0099)
TROUBLESHOOTING PROCEDURE
WORK LIGHTS DO NOT ILLUMINATE
STEP 1
Are both work lights inoperative, or just one?
1.
Open control panel cover. (TM 5-3825-270-10)
2.
Rotate EMERGENCY STOP switch to on position. (TM 5-3825-270-10)
3.
Move LIGHTS switch to ON position.
LIGHTS SWITCH
Figure 1. Lights Switch - Step 1.
4.
Verify if one or both work lights do not illuminate.
CONDITION/INDICATION
Are both work lights inoperative, or just one?
