TM 5-3825-270-23&P
FIELD MAINTENANCE
WORK LIGHT WIRE HARNESS REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool Kit, General Mechanic's: Automotive
Cable Ties (WP 0224, Table 1, Item 9)
(WP 0225, Table 1, Item 12)
Tags, Identification, White (WP 0224, Table 1, Item
Tap & Die Set (Screwdriver) (WP 0225, Table 1,
54)
Item 2)
References
Parts Manual (WP 0220) Figure 4018
Materials/Parts
Compound, Sealing, Loctite 242 (WP 0224, Table
1, Item 19, 20, 21, 22)
Equipment Condition
Batteries disconnected. (WP 0085)
Air valve cover plate removed. (WP 0164)
REMOVAL
NOTE
Remove cable ties as required.
1.
Open control panel cover (Figure 1, Item 1) by releasing rubber t-handle (Figure 1, Item 2).
1
2
Figure 1. Work Light Wire Harness Removal.
CAUTION
Do not allow control panel to hang by wires. Failure to comply may result in damage to
equipment.
2.
Remove six screws (Figure 2, Item 3) and washers (Figure 2, Item 4) from main control box (Figure 2, Item 5)
and control panel (Figure 2, Item 6).