TM 5-3825-270-23&P
0107
INSTALLATION - Continued
7
8
9, 10
Figure 10. Work Light Wire Harness Installation.
5.
Install black wire (Figure 10, Item 9) on terminal B (Figure 10, Item 8).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
6.
Apply sealant to the threads of six screws (Figure 11, Item 3).
5
6
3, 4
Figure 11. Work Light Wire Harness Installation.
7.
Install six washers (Figure 11, Item 4) and screws (Figure 11, Item 3) on main control box (Figure 11, Item 5)
and control panel (Figure 11, Item 6). Tighten six screws securely.
8.
Close control panel cover (Figure 12, Item 1) and secure with rubber t-handle (Figure 12, Item 2).