TM 5-3825-270-23&P
0006
ENGINE
START/ENGINE
STOP SWITCH
ORANGE/RED
WIRE
RED
JUMPER
WIRES
ORANGE/BLACK
WIRE
Figure 16. Engine Start/Engine Stop Switch Red Jumper Wires - Step 12.
5.
Connect black multimeter lead to red jumper wire at ENGINE OFF/BATTERY DRAIN indicator.
WHITE / BLACK
WIRE
RED
BACK OF
JUMPER
CONTROL
WIRE
PANEL
WHITE / RED
ENGINE OFF / BATTERY
WIRE
DRAIN INDICATOR
Figure 17. Engine Off/Battery Drain Indicator - Step 12.
6.
Note multimeter reading.
CONDITION/INDICATION
Are less than 200 ohms present on red jumper wire from ENGINE START/ENGINE STOP switch to ENGINE
OFF/BATTERY DRAIN indicator?
DECISION
No - Repair or replace red jumper wire between ENGINE START/ENGINE STOP switch and ENGINE DRAIN
indicator. (WP 0099) Verify problem is solved. (Step 16 - Does engine crank?)
Yes - Go to step 13. (Step 13 - Are less than 200 ohms present on orange/black wire from ENGINE START/
ENGINE STOP switch to interconnect terminal strip, terminal 6?)
STEP 13
