TM 5-3825-270-23&P
0006
CONDITION/INDICATION
Are less than 200 ohms present on black wire between interconnect terminal strip, terminal 6 and governor
controller harness connector pin G2?
DECISION
No - Repair or replace black wire between interconnect terminal strip, terminal 6 and governor controller harness
connector pin G2. (WP 0099) Verify problem is solved. (Step 16 - Does engine crank?)
Yes - Go to step 15. (Step 15 - Are less than 200 ohms present on blue wire from governor controller harness
connect pin A2 to starter relay?)
STEP 15
Are less than 200 ohms present on blue wire from governor controller harness connect pin A2 to starter
1.
Connect red multimeter lead to governor controller harness connector pin A2.
GOVERNOR
CONTROLLER
GOVERNOR
CONTROLLER
HARNESS
CONNECTOR
A
E
F
K
3
3
2
2
1
1
Figure 22. Governor Controller Harness Connector Pin A2 - Step 15.
2.
Connect black multimeter lead to blue wire at starter relay.
STARTER RELAY
BLUE WIRE
Figure 23. Starter Relay Blue Wire - Step 15.