TM 5-3825-270-23&P
0006
STARTER SOLENOID
WHITE WIRE
Figure 14. Starter Solenoid White Wire - Step 11.
6.
Note multimeter reading.
CONDITION/INDICATION
Are less than 200 ohms present on white wire from starter relay to starter solenoid?
DECISION
No - Repair or replace white wire between starter relay and starter solenoid. (WP 0099) Verify problem is
solved. (Step 16 - Does engine crank?)
Yes - Replace starter relay. (WP 0138) Verify problem is solved. (Step 16 - Does engine crank?)
STEP 12
Are less than 200 ohms present on red jumper wire from ENGINE START/ENGINE STOP switch to ENGINE
OFF/BATTERY DRAIN indicator?
1.
Push in EMERGENCY STOP switch to off position. (TM 5-3825-270-10)
2.
Remove six control panel faceplate screws.