TM 5-3825-270-23&P
0006
STARTER SOLENOID
WHITE WIRE
Figure 9. Starter Solenoid White Wire - Step 9.
5.
Connect black multimeter lead to a known good ground.
6.
With the aid of an assistant, place ENGINE START/ENGINE STOP switch to ENGINE START position and
hold.
ENGINE START/ENGINE STOP SWITCH
Figure 10. Engine Start//Engine Stop Switch - Step 9.
7.
Note multimeter reading.
8.
Release ENGINE START/ENGINE STOP switch.
CONDITION/INDICATION
Are 22 to 28 VDC present at starter solenoid white wire with ENGINE START/ENGINE STOP switch in ENGINE
START position?
DECISION
No - Go to step 10. (Step 10 - Are 22 to 28 VDC present at starter relay blue wire with ENGINE START/ENGINE
STOP switch in ENGINE START position?)
Yes - Replace starter. (WP 0139) Verify problem is solved. (Step 16 - Does engine crank?)
STEP 10
