TM 5-3825-270-23&P
0006
Table 1. Battery State Of Charge Voltage Table - Continued.
0%
<=11.6
<=23.2
CONDITION/INDICATION
Do batteries measure 24.2 to 25.4 VDC with multimeter?
DECISION
No - Service batteries (WP 0082) or replace batteries. (WP 0086) Verify problem is solved. (Step 16 - Does
engine crank?)
Yes - Go to step 5. (Step 5 - Are wire connections on starter properly connected and free of damage and
corrosion?)
STEP 5
Are wire connections on starter properly connected and free of damage and corrosion?
1.
Open front engine access cover. (TM 5-3825-270-10)
2.
Visually inspect wire connections on starter for proper connection, damage, and corrosion.
WIRE
CONNECTIONS
Figure 5. Wire Connections - Step 5.
CONDITION/INDICATION
Are wire connections on starter properly connected and free of damage and corrosion?
DECISION
No - Properly clean (WP 0069), connect (WP 0139), and/or replace damaged wiring at starter. (WP 0099) Verify
problem is solved. (Step 16 - Does engine crank?)
Yes - Go to step 6. (Step 6 - Are wire connections on starter relay free of damage and corrosion?)
STEP 6
Are wire connections on starter relay free of damage and corrosion?
1.
Open rear engine access cover. (TM 5-3825-270-10)
2.
Visually inspect starter relay wire connections.
