TM 5-3825-270-23&P
0006
STARTER RELAY
CONNECTIONS
Figure 6. Starter Relay Wire Connections - Step 6.
CONDITION/INDICATION
Are wire connections on starter relay free of damage and corrosion?
DECISION
No - Properly clean (WP 0069), connect (WP 0138), and/or replace damaged starter relay wiring. (WP 0099)
Verify problem is solved. (Step 16 - Does engine crank?)
Yes - Go to step 7. (Step 7 - Are 22 to 28 VDC present at starter solenoid positive terminal?)
STEP 7
Are 22 to 28 VDC present at starter solenoid positive terminal?
WARNING
Remove all jewelry such as rings, ID tags, bracelets, etc., prior to working on or around
vehicle. Jewelry and tools can catch on equipment, contact positive electrical circuits, and
cause a direct short, severe burns, or electrical shock. Failure to comply may result in injury
or death to personnel.
1.
Ensure multimeter is set to measure voltage.
2.
Connect red multimeter lead to starter solenoid positive terminal.