TM 5-3825-270-23&P
0027
NEGATIVE
BATTERY
TERMINAL
Figure 10. Negative Battery Terminal - Step 8.
4.
Note multimeter reading.
CONDITION/INDICATION
Are less than 200 ohms measured from negative terminal strip, terminal 6 to negative battery terminal?
DECISION
No - Replace black wire between negative terminal strip, terminal 6 and negative battery terminal. (WP 0099)
Verify problem is solved. (Step 11 - Does control panel have power?)
Yes - Replace red wire between EMERGENCY STOP switch, terminal 2 and positive terminal strip, terminal
10. (WP 0099) Verify problem is solved. (Step 11 - Does control panel have power?)
STEP 9
Are 22 to 28 VDC present at 15-amp circuit breaker terminal 1?
WARNING
Remove all jewelry such as rings, ID tags, bracelets, etc., prior to working on or around
vehicle. Jewelry and tools can catch on equipment, contact positive electrical circuits, and
cause a direct short, severe burns, or electrical shock. Failure to comply may result in injury
or death to personnel.
1.
Ensure multimeter is setup to measure voltage.
2.
Connect red multimeter probe to 15-amp circuit breaker terminal 1.
