TM 5-3820-276-10-1
0045
GENERATOR OPERATION - Continued
1
2
3
WWDS00218
Figure 3.
Auxiliary Power Unit Control Switches.
Set RUN/IDLE/IDLE LOCK switch (Figure 3, Item 2) to RUN/IDLE position.
4.
NOTE
Simultaneous welding while generating power for auxiliary hookup(s) is possible, however
generator power decreases as weld current increases. Refer to Table 1 for simultaneous
weld and power current draw variations.
5.
Rotate fine control switch (Figure 3, Item 1) to 10 for full generating power.
Table 1.
Simultaneous Weld and Power.
Weld Current in
120 V Full kVA
240 V Full kVA
Total Power in Watts
Amperes
Receptacle Amperes
Receptacle Amperes
250
2,200
18
9
180
3,500
29
14
125
5,200
43
21
90
8,000
66
33
0
11,000 (Peak)
84
42
