TM 5-3820-276-10-1
0045
WELDER/GENERATOR ENGINE SHUTDOWN PROCEDURE
WARNING
The Water Well Drilling System presents numerous falling hazards. Use care when
working on top of equipment. Failure to comply may result in injury or death to personnel.
Seek medical attention in the event of an injury.
CAUTION
Ensure equipment is disconnected from auxiliary power receptacles during startup and
shutdown. Some equipment can be adversely affected by changes in frequency as engine
rpm changes during startup and shutdown. Failure to comply may result in damage to
equipment.
1.
Disconnect equipment from generator.
2.
Close the auxiliary lower control panel doors (Figure 5, Items 1 and 2).
1
2
WWDS00631
Figure 5.
Auxiliary Lower Control Panel Doors.
3.
Set RUN/IDLE switch (Figure 6, Item 2) to IDLE LOCK position.
