TM 5-3825-270-23&P
FIELD MAINTENANCE
DISCHARGE TUBE AND PIPE ASSEMBLY PUMP OUTLET HOSE REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Gasket (WP 0226, Table 1, Item 34) Qty: 1
Tool Kit, General Mechanic's: Automotive
Gasket (WP 0226, Table 1, Item 34) Qty: 1
(WP 0225, Table 1, Item 12)
Wrench, Torque, 40-200 lb-in (6-23 Nm), 3/8 in.
Drive (WP 0225, Table 1, Item 14)
References
Parts Manual (WP 0220) Figure 4014
Materials/Parts
Compound, Sealing, Pipe Thread, Loctite 567
Equipment Condition
(WP 0224, Table 1, Item 23, 24, 25, 26)
Rear platform screen removed. (WP 0165)
Locknut (WP 0226, Table 1, Item 76) Qty: 12
Inlet valve and hose removed. (WP 0183)
Locknut (WP 0226, Table 1, Item 64) Qty: 8
REMOVAL
1.
Disconnect connector (Figure 1, Item 2) from harness connector (Figure 1 Item 1).
1
2
Figure 1. Discharge Tube and Pipe Assembly Pump Outlet Hose Removal.
2.
Loosen clamp (Figure 2, Item 6) and remove water hose (Figure 2, Item 5) from fitting (Figure 2, Item 7).