TM 5-3825-270-23&P
0199
REMOVAL - Continued
9
10
11
12
13, 14
15
4
16
Figure 4. Discharge Tube and Pipe Assembly Pump Outlet Hose Removal.
6.
Remove two screws (Figure 4, Item 13), washers (Figure 4, Item 14), and support bracket (Figure 4, Item 16)
from water pump (Figure 4, Item 9) and flywheel housing (Figure 4, Item 15).
7.
Remove eight locknuts (Figure 5, Item 26) and two flange reinforcement plates (Figure 5, Item 25) from water
pump (Figure 5, Item 9) and discharge tube (Figure 5, Item 4). Discard locknuts.
17
18, 19
20
4
21, 22
23
24
27
26
25
9
Figure 5. Discharge Tube and Pipe Assembly Pump Outlet Hose Removal.
8.
Remove eight locknuts (Figure 5, Item 19), screws (Figure 5, Item 18), gasket (Figure 5, Item 22) and flange
(Figure 5, Item 21) from cross pipe (Figure 5, Item 20). Discard locknuts and gasket.
9.
Loosen two clamps (Figure 5, Item 23) and remove water hose (Figure 5, Item 24) from discharge tube (Figure
5, Item 4).
10.
Loosen two clamps (Figure 5, Item 17) and remove water hose (Figure 5, Item 24) from flange (Figure 5, Item
20).
11.
Remove discharge tube (Figure 5, Item 4) and gasket (Figure 5, Item 27) from water pump (Figure 5, Item 9).
12.
Remove fitting (Figure 6, Item 7) from fitting (Figure 6, Item 29).