TM 5-3825-270-23&P
0199
REMOVAL - Continued
3
4
7
6
5
Figure 2. Discharge Tube and Discharge Tube and Pipe Assembly Pump Outlet Hose Removal.
NOTE
Note position of pressure sensor prior to removal to ensure proper installation.
3.
Remove pressure sending unit assembly (Figure 2, Item 3) from discharge tube (Figure 2, Item 4).
4.
Remove drain cock (Figure 3, Item 8) from discharge tube (Figure 3, Item 4).
4
8
Figure 3. Discharge Tube and Pipe Assembly Pump Outlet Hose Removal.
5.
Remove four locknuts (Figure 4, Item 11), washers (Figure 4, Item 10), and two u-bolts (Figure 4, Item 12)
from discharge tube (Figure 4, Item 4) and bracket (Figure 4, Item 16). Discard locknuts.