TM 5-3825-270-23&P
0117
REMOVAL - Continued
15
17
16
CABLE TIE
19
18
Figure 4. Injection Pump Removal.
8.
Remove spring (Figure 4, Item 19) from stud (Figure 4, Item 18).
9.
Remove locknut (Figure 4, Item 15) from stud (Figure 4, Item 18). Discard locknut.
10.
Remove linkage (Figure 4, Item 16) from injection pump linkage (Figure 4, Item 17).
11.
Remove three nuts (Figure 5, Item 20) from injection pump (Figure 5, Item 14).
20
21
13
22
14
Figure 5. Injection Pump Removal.
12.
Loosen three screws (Figure 5, Item 21) evenly from injection pump (Figure 5, Item 14) and injection pump
housing (Figure 5, Item 13).
NOTE
Linkage must be aligned with grove in housing when removing injection pump.
13.
Remove three screws (Figure 5, Item 21), injection pump (Figure 5, Item 14), and shim (Figure 5, Item 22)
from injection pump housing (Figure 5, Item 13).
