TM 5-3825-270-23&P
0117
INSTALLATION - Continued
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
12.
Apply sealing compound to threads of bleeder valve (Figure 8, Item 6).
13.
Install bleeder valve (Figure 8, Item 6) on injection pump (Figure 8, Item 14).
WARNING
Fuel is very flammable and can explode easily. Keep fuel away from open flame and keep
fire extinguisher within easy reach when working with fuel. Do not work on fuel system when
engine is hot. Fuel can be ignited when engine is hot. When working with fuel, post signs that
read NO SMOKING WITHIN 50 FEET OF VEHICLE. Failure to comply may result in injury
or death to personnel.
14.
Install fuel hose (Figure 8, Item 7) on fitting (Figure 8, Item 9) with clamp (Figure 8, Item 8).
15.
Install fuel hose (Figure 9, Item 4) on bleeder valve (Figure 9, Item 6) with clamp (Figure 9, Item 5).
4
5
6
Figure 9. Injection Pump Removal.
16.
Install fuel hose (Figure 10, Item 2) on fuel pump (Figure 10, Item 1) with clamp (Figure 10, Item 3).
