TM 5-3825-270-23&P
0116
INSTALLATION
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
1.
Coat threads of engine emergency temperature sending unit (Figure 2, Item 3) with pipe thread sealant.
1
2
3
Figure 2. Engine Emergency Temperature Sending Unit Installation.
2.
Install engine emergency temperature sending unit (Figure 2, Item 3) in thermostat housing (Figure 2, Item 1).
3.
Connect wire (Figure 2, Item 2) to engine emergency temperature sending unit (Figure 2, Item 3).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Fill coolant reservoir. (WP 0075)
2.
Install engine compartment cover. (WP 0142)
END OF TASK
END OF WORK PACKAGE