TM 5-3825-270-23&P
FIELD MAINTENANCE
NATO SLAVE CONNECTOR REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool Kit, General Mechanic's: Automotive
Lockwasher (WP 0226, Table 1, Item 75) Qty: 2
(WP 0225, Table 1, Item 12)
Locknut (WP 0226, Table 1, Item 63) Qty: 4
Materials/Parts
References
Locknut (WP 0226, Table 1, Item 77) Qty: 4
Parts Manual (WP 0220) Figure 4009
Equipment Condition
Batteries removed. (WP 0086)
REMOVAL
1.
Remove four locknuts (Figure 1, Item 4), screws (Figure 1, Item 2), washers (Figure 1, Item 3), and NATO
slave box (Figure 1, Item 5) from battery box (Figure 1, Item 1). Discard locknuts.
1
2, 3, 4
5
Figure 1. NATO Slave Box Removal.
2.
Remove screw (Figure 2, Item 7), lockwasher (Figure 2, Item 8), and negative battery cable (Figure 2, Item 6)
from NATO slave receptacle (Figure 2, Item 9). Discard lockwasher.