• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 8. Red Wire At Alternator - Step 6.
BATTERY VOLTAGE GAUGE READS LOW - Continued

Field Maintenance Manual Tools List For Engineer Mission Module - Water Distributor Page Navigation
  158    159    160    161    162  163  164    165    166    167    168  
img
. . . .
TM 5-3825-270-23&P
0029
POSITIVE
BATTERY
TERMINAL
Figure 9. Positive Battery Terminal - Step 6.
6.
Note multimeter reading.
CONDITION/INDICATION
Are less than 200 ohms measured on red wire at alternator to positive terminal on battery?
DECISION
No - Repair or replace red wire from alternator to starter. (WP 0099) Verify problem is solved. (Step 7 - Does
BATTERY VOLTAGE gauge read normal?)
Yes - Replace alternator. (WP 0081) Verify problem is solved. (Step 7 - Does BATTERY VOLTAGE gauge read
normal?)
STEP 7
Does BATTERY VOLTAGE gauge read normal?
1.
If batteries are disconnected, connect batteries. (WP 0085)
2.
Rotate EMERGENCY STOP switch to on position. (TM 5-3825-270-10)
3.
Observe BATTERY VOLTAGE gauge.
BATTERY
VOLTAGE GAUGE
Figure 10. Battery Voltage Gauge - Step 5.
0029-9


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.