TM 5-3825-270-23&P
0029
STEP 6
Are less than 200 ohms measured on red wire at alternator to positive terminal on battery?
1.
Disconnect batteries. (WP 0085)
2.
Open front engine access cover.
3.
Set multimeter to measure voltage.
WARNING
Ensure electrical power is off prior to working on all electrical systems. Failure to comply
may result in injury or death to personnel.
Remove all jewelry, such as rings, ID tags, bracelets, etc., prior to working on or around
equipment. Jewelry and tools can catch on equipment, contact positive electrical circuits,
and cause a direct short, severe burns, or electrical shock. Failure to comply may result
in injury or death to personnel.
4.
Connect red multimeter probe to red wire at alternator.
ALTERNATOR
RED
WIRE
Figure 8. Red Wire At Alternator - Step 6.
5.
With the aid of assistant using jumper wire, connect black multimeter probe to positive battery terminal.