TM 5-3820-276-10-2
OPERATOR MAINTENANCE
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - GROUTER
INITIAL SETUP:
Materials/Parts
References (cont.)
Antifreeze (WP 0233, Table 1, Item 1)
Fuel, Diesel, DF-2 (WP 0233, Table 1, Item 8)
Hydraulic Oil (WP 0233, Table 1, Item 17)
Oil, Lubricating, Engine OE/HDO-15W/40
(WP 0233, Table 1, Item 13)
Equipment Condition
Engine off (Volume 1, WP 0040)
References
Water Well Support Vehicle (WWSV) grounded
Volume 1, WP 0038
(Volume 1, WP 0037)
Table 1.
PMCS - Grouter - Before Drilling Equipment Operation.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
WARNING
Do not use your bare hands to check for
fluid leaks. Fluid leakage that is under
pressure can penetrate your skin. Always
use a board or cardboard when you check
for a leak. If fluid is injected into your skin,
seek medical aid immediately. Failure to
comply may result in injury or death to
personnel. Seek medical attention in the
event of an injury.
NOTE
1
Before
Hydraulic Pump,
Hydraulic
Begin the PMCS at right side of
Connections
Grouter.
Check hydraulic pump and hose
connections as you go around and
do other PMCS checks.
Check hydraulic pump (Figure 1, Item 2) and hose
Hydraulic connections
connections (Figure 1, Item 1) for loose fittings and
loose or leaking. Notify
leaks.
maintenance.