TM 5-3820-276-10-1
0031
TRUCK MOUNTED AIR COMPRESSOR OPERATION - NON-DRILLING OPERATIONS - Continued
25.
Lift and hold TRUCK CLUTCH control lever (Figure 8, Item 5).
2
3
1
5
WWDS00960
4
Figure 8.
TRUCK CLUTCH Control.
26.
Push COMPRESSOR DRIVE ENGAGE/DISENGAGE (Figure 8, Item 3) switch down to DISENGAGE.
27.
Release TRUCK CLUTCH control lever (Figure 8, Item 5).
28.
Set STANDPIPE BLOW DOWN switch (Figure 8, Item 4) to up position to bleed excess air pressure.
29.
Adjust THROTTLE (Figure 8, Item 2) to decrease engine speed to approximately 700 rpm.
30.
Set CONSOLE POWER ON/OFF switch (Figure 8, Item 1) to OFF position.
31.
Install console cover panel (Figure 9, Item 1) to drilling console (Figure 9, Item 2).
02/13/2013root(opusualwp)wpno(O10018)