TM 5-3820-276-10-1
0031
TRUCK MOUNTED AIR COMPRESSOR OPERATION - NON-DRILLING OPERATIONS - Continued
1
2
3
4
WWDS00959
Figure 7.
Air Pressure Regulator.
19.
Adjust air pressure regulator (Figure 7, Item 2) until desired pressure is indicated on air pressure regulator
gauge (Figure 7, Item 4).
20.
Air is now available for use at connector (Figure 7, Item 3).
21.
Connect air hose (not shown) if required, to connector (Figure 7, Item 3).
NOTE
The steps that follow are used to shut down air compressor after non-drilling operations.
22.
Adjust air pressure regulator (Figure 7, Item 2) until 0 psi (0 kPa) air pressure is indicated on air pressure
regulator gauge (Figure 7, Item 4).
23.
Rotate air pressure regulator lever (Figure 7, Item 1) to closed position.
24.
Disconnect air hose (not shown) if required, from connector (Figure 7, Item 3).