TM 5-3820-276-10-1
0031
TRUCK MOUNTED AIR COMPRESSOR OPERATION - NON-DRILLING OPERATIONS - Continued
NOTE
Air pressure must be above 100 psi (689 kPa) before changing mode of operation.
5.
Set RIG MODE/ROAD MODE switch (Figure 4, Item 1) to RIG MODE position.
6.
Set hi/low range control lever (Figure 4, Item 3) to up (high) position.
7.
Using gear shift lever (Figure 4, Item 2), place transmission into 9th gear.
8.
Slowly release clutch pedal (Figure 4, Item 6).
9.
Rotate eyebolt (Figure 5, Item 3) to align with slot in console cover panel (Figure 5, Item 1).
1
2
3
WWDS00229
Figure 5.
Console Cover Panel Removal.
10.
Remove console cover panel (Figure 5, Item 1) from drilling console (Figure 5, Item 2).