TM 5-3820-276-10-1
0031
TRUCK MOUNTED AIR COMPRESSOR OPERATION - NON-DRILLING OPERATIONS - Continued
11.
Set CONSOLE POWER ON/OFF switch (Figure 6, Item 1) to ON position.
1
2
3
4
5
6
7
WWDS00715
Figure 6.
Console Power Switch.
12.
Adjust THROTTLE (Figure 6, Item 2) to increase engine speed between 1,800 to 2,100 rpm.
NOTE
COLD START button is only used for cold weather starting.
13.
If required, push and hold COLD START button (Figure 1, Item 5) for one minute.
14.
Lift and hold TRUCK CLUTCH control lever (Figure 6, Item 7) to disengage truck clutch.
NOTE
Ensure air standpipe and blow down pipe are closed.
15.
Rotate COMPRESSOR HIGH/LOW knob (Figure 6, Item 6) to LOW position.
16.
Set COMPRESSOR DRIVE ENGAGE/DISENGAGE switch (Figure 6, Item 3) up to ENGAGE position and
start compressor. Compressor drive disconnect engaged indicator light (Figure 6, Item 4) will illuminate
when compressor starts.
17.
Release TRUCK CLUTCH control lever (Figure 6, Item 7).
18.
Rotate air pressure regulator lever (Figure 7, Item 1) to open position.