SECTION VI. PREPARATION FOR SHIPMENT AND STORAGE2.24 PRESERVATIONPROCEDURES.No special preservation procedures are required for the 600 GPM pumping assemblies.2.25 PACKING.2.25.1PackingofPumpingAssenblyModel609-A. Prepare Pumping Assembly Model 609-A formovement as follows:ToolsGeneral Mechanic’s Tool Kit, Appendix B, Section III, Item 1Sealer,steel strapping, hand, refer to TM 10-4320-303-14.P e r s o n n elFour personnel required for installationComponents/MaterialsPressure Sensitive Adhesive Tape, l-inchPressure Sensitive Adhesive Tape, 4-inchProtective plywood cap (saved when ModelSteel Strapping (Appendix C, Item 30)of protective plywood cap.(Appendix C, Item 34)(Appendix C, Item 35)609-A was unpacked, paragraph 2.4.2.1).a .Remove muffler in accordance with paragraph 2.13.1.b.Remove air cleaner in accordance with paragraph 2.14.1.Figure 2-187. Sealing Model 609-A Air Intake and Exhaust Pipe Outlet Openings.c .Seal air intake and exhaust pipe outlet openings as follows:(1) Place 4-inch tape (Figure 2-187,1) over opening in air intake pipe (2).Fold 4-inch tape (1) down along sides of air intake pipe (2).(2) Secure 4-inch tape (1) with l-inch tape (3).2-419TM 10-4320-344-24
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
