TM 10-4320-344-24
2.25.3 Packing of Pumping Assembly Model US636HCCD-1. (Continued)
Components/Materials
Pressure Sensitive Adhesive Tape,
l-inch (Appendix C, Item 34)
Pressure Sensitive Adhesive Tape, 4-inch (Appendix C, Item 35)
Protective plywood cap (saved when US636HCCD-1 was unpacked, paragraph 2.4.2.3)
Steel Strapping (Appendix C, Item 30)
a .
Remove muffler in accordance with paragraph 2.13.3.
b .
Remove air cleaner in accordance with paragraph 2.14.3.
c .
Remove air intake pipe assembly in accordance with paragraph 2.
Figure 2-190.
Sealing Model US636HCCD-1 Air Intake and Exhaust Pipe
0utlet Openings.
d.
Seal air intake and exhaust outlet openings as follows:
(1) Place 4-inch tape (Figure 2-190, 1) over turbocharger air intake opening
( 2 ) .
Fold 4-inch tape (1) down along sides of turbocharger air intake
opening (2).
(2) Secure 4-inch tape (1) with l-inch tape (3).
(3) Place 4-inch tape (4) over opening in manifold exhaust pipe (5). Fold
4-inch tape (4) down along sides of manifold exhaust pipe (5).
(4) Secure 4-inch tape (5) with l-inch tape (6).
e .
Refer to paragraph 2.15.4 and disconnect battery cable from battery.
f .
Secure air cleaner, muffler, and related parts on Model US636HCCD-1 trailer as
f o l l o w s:
(1) Place air cleaner (Figure 2-191,
1) and weather cap (2) on top of battery
b o x ( 3 ).
(2) Secure air cleaner (1) and weather cap (2) with tape (4).
2-422
