TM 10-4320-307-24
3-6 STORAGE BOX AND COVER REPAIR.
This task covers: Cleaning/lnspection/Repair
INITIAL SETUP
Tools
Manual References
Tool kit, general mechanic's (Item 1, Appendix B)
TM 9-237
Grinder
Equipment
Materials/Parts
Condition
Dry cleaning solvent (Item 30, Appendix C)
Reference
Condition Description
Paint (Item 23, Appendix C)
Paragraph
Storage box and cover
Emery cloth (Item 2, Appendix C)
2-24
removed
Wire brush Eye protection
General Safety Instructions
Respiratory protection
Well ventilated area required for cleaning, welding,
and painting procedures.
CLEANING/INSPECTION/REPAIR:
Dry cleaning solvent is potentially dangerous. Avoid repeated and prolonged
breathing of vapors and skin contact with the liquid. Do not use near open flame,
arcing equipment, or other ignition source. Always wear eye protection and pro-
tective clothing.
Death or serious injury could occur if compressed air is directed against the
skin. Do not use compressed air for cleaning or drying unless the pressure is/has
been reduced to 30 psi (2.11 kgcm2) or less. When working with compressed air
always use chip guards, eye protection, and other personal protective
equipment.
3-9
