TM 10-4320-307-243-6 STORAGEBOXANDCOVERREPAIR. (CONT).1.Clean storage box (1) and cover (2) with wire brushand dry cleaning solvent to remove all traces of greaseand oil. Dry with compressed air.2.Inspect storage box and cover for rust spots,\pardents,cracks, punctures, and gouges.3.Inspect mounting holes for distortion and tearing.4.Inspect storage box for cracked welds.5.Straighten out dents in storage box and cover asnecessary.Welding operations produce heat, highly toxic fumes, injurious radiation, metalslag, and airborne particles. Welding goggles, properly tinted lenses, an apron orjacket, and welders' boots are required to avoid injury to personnel.'6. Weld cracks, punctures, or tears in sheet metal, using patches on rusted areas if necessary. Refer to TM 9-237.Grinding operations create airborne abrasive dust and particles. Respiratory andeye protection is required to avoid injury to personnel.7. Grind smooth any gouges.8. Use emery cloth to smooth out repaired areas and repaint.9. Replace storage box and cover in accordance with paragraph 2-24.3-10
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
