TM 10-4320-307-24
3-4 TANK ASSEMBLY REPAIR .
This task covers: Cleaning/lnspection/Repair
INITIAL SETUP
Tools
Manual References
Tool kit, general mechanic's (Item 1, Appendix B)
TM 9-237
Explosive vapor detector (Item 2, Appendix B)
Equipment
Materials/Parts
Condition
Reference
Condition Description
Dry cleaning solvent (Item 30, Appendix C)
Soap (Item 20, Appendix C)
Paragraph
Tank assembly
removed
Paint (Item 23, Appendix C)
2-22
Emery cloth (Item 2, Appendix C)
General Safety Instructions
Wire brush
Well ventilated area required for cleaning,
welding, and painting procedures.
CLEANING/INSPECTION/REPAIR:
1.
Inspect tank assembly (1) for fuel seepage or wet
spots. Mark areas for repair.
2.
Inspect tank assembly (1) for the following:
a. Dents and gouges.
b. Cracks or punctures which require welding.
c. Rust or corrosion that could become a source of
future leaks. Test these areas by tapping with a
sharp center punch. If area is easily penetrated,
replace fuel tank.
3-5
