TM 10-4320-307-24
3-5 ENGINE ENCLOSURE REPAIR .
This task covers: Cleaning/lnspection/Repair
INITIAL SETUP
Tools
Manual References
Tool kit, general mechanic's (Item 1, Appendix B)
TM 9-237
Grinder
Equipment
Materials/Parts
Condition
Dry cleaning solvent (Item 30, Appendix C)
Reference
Condition Description
Paint (Item 23, Appendix C)
Paragraph
Engine
enclosure removed
Emery cloth (Item 2, Appendix C)
2-23
Wire brush
General Safety Instructions
Respiratory protection
Well ventilated area required for cleaning, welding,
and painting procedures.
Personnel Required
Two
CLEANING/INSPECTION/REPAIR:
Dry cleaning solvent is potentially dangerous. Avoid repeated and prolonged breathing of
vapors and skin contact with the liquid. Do not use near open flame, arcing equipment, or
other ignition source. Always wear eye protection and protective clothing.
Death or serious injury could occur if compressed air is directed against the skin. Do not
use compressed air for cleaning or drying unless the pressure is/has been reduced to 30
psi (2.11 kgcm2) or less. When working with compressed air always use chip guards, eye
protection, and other personal protective equipment.
3-7
