TM 5-3825-270-23&P
FIELD MAINTENANCE
SUCTION TUBE AND HOSE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4014
(WP 0225, Table 1, Item 12)
Wrench, Torque, 40-200 lb-in (6-23 Nm), 3/8 in.
Equipment Condition
Drive (WP 0225, Table 1, Item 14)
Strainer housing removed. (WP 0182)
Materials/Parts
Locknut (WP 0226, Table 1, Item 76) Qty: 8
Gasket (WP 0226, Table 1, Item 34) Qty: 1
REMOVAL
1.
Loosen two clamps (Figure 1, Item 1) on suction hose (Figure 1, Item 3) and suction tube (Figure 1, Item 2).
1
2
3
Figure 1. Suction Tube and Hose Removal.
2.
Loosen clamp (Figure 2, Item 9) and remove water hose (Figure 2, Item 10) from fitting (Figure 2, Item 8).