TM 5-3825-270-23&P
0200
REMOVAL - Continued
3
6
Figure 2. Pump Drive Coupling Removal
END OF TASK
INSTALLATION
1.
Install six sleeves (Figure 3, Item 6) in pump drive coupling (Figure 3, Item 3).
3
6
Figure 3. Pump Drive Coupling Installation
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
2.
Apply sealing compound to the threads of six screws (Figure 4, Item 1).