TM 5-3825-270-23&P
FIELD MAINTENANCE
SOLENOID VALVE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool Kit, General Mechanic's: Automotive
Screw (WP 0226, Table 1, Item 48) Qty: 4
(WP 0225, Table 1, Item 12)
Locknut (WP 0226, Table 1, Item 8) Qty: 4
Materials/Parts
References
Compound, Sealing, Pipe Thread, Loctite 567
Parts Manual (WP 0220) Figure 4014
(WP 0224, Table 1, Item 23, 24, 25, 26)
Tags, Identification, White (WP 0224, Table 1, Item
Equipment Condition
54)
Batteries disconnected. (WP 0085)
Air valve cover plate removed. (WP 0164)
REMOVAL
NOTE
Tag and mark all hoses and wires prior to removal to ensure proper installation.
Perform Steps (1) through (8) if removing right solenoid valve.
Perform Steps (9) through (13) if removing left solenoid valve.
1.
Loosen clamp (Figure 1, Item 2) and remove hose (Figure 1, Item 1) from fitting (Figure 1, Item 3).
3
4
2
1
7
6
5
Figure 1. Solenoid Valve Removal.
2.
Loosen clamp (Figure 1, Item 5) and remove hose (Figure 1, Item 6) from fitting (Figure 1, Item 7).
3.
Remove fitting (Figure 1, Item 7) from fitting (Figure 1, Item 3).
4.
Remove fitting (Figure 1, Item 3) from fitting (Figure 1, Item 4).
5.
Disconnect right solenoid valve connector lead (Figure 2, Item 9) from harness connector (Figure 2, Item 8).