TM 5-3825-270-23&P
FIELD MAINTENANCE
FIRE EXTINGUISHER BRACKET REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4017
(WP 0225, Table 1, Item 12)
Equipment Condition
Materials/Parts
Fire extinguisher removed. (TM 5-3825-270-10)
Locknut (WP 0226, Table 1, Item 56) Qty: 4
Locknut (WP 0226, Table 1, Item 76) Qty: 3
REMOVAL
1.
Remove four locknuts (Figure 1, Item 1), four washers (Figure 1, Item 2), four screws (Figure 1, Item 3), and
fire extinguisher bracket (Figure 1, Item 4) from mounting bracket (Figure 1, Item 5). Discard locknuts.
1, 2, 3
4
5
Figure 1. Fire Extinguisher Bracket Removal.
NOTE
Perform Step (2) if mounting bracket is damaged.
2.
Remove three locknuts (Figure 2, Item 6), six washers (Figure 2, Item 7), three screws (Figure 2, Item 8), and
mounting bracket (Figure 2, Item 5) from hose reel (Figure 2, Item 9). Discard locknuts.
