TM 5-3825-270-23&P
FIELD MAINTENANCE
DATA PLATE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts
Drill, Electric, Portable (WP 0225, Table 1, Item 2)
Rivet (WP 0226, Table 1, Item 68) Qty: 12
Drill, Set, Twist (WP 0225, Table 1, Item 2)
Goggles, Industrial (WP 0225, Table 1, Item 2)
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4050
(WP 0225, Table 1, Item 12)
REMOVAL
WARNING
Wear safety goggles when drilling to prevent injury to eyes. Failure to comply may result in
injury or death to personnel.
NOTE
All data plates are removed the same way. One is shown.
Number of rivets may vary from each data plate.
Using a 1/8 in. drill bit, remove four rivets (Figure 1, Item 1) and data plate (Figure 1, Item 2) from water distributor
(Figure 1, Item 3). Discard rivets.
1
2
3
Figure 1. Data Plate Removal.
END OF TASK