TM 5-3825-270-23&P
FIELD MAINTENANCE
WIRE TROUGH CHANNEL REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic's: Automotive
Construction Equipment Repairer 91L (2)
(WP 0225, Table 1, Item 12)
References
Materials/Parts
Parts Manual (WP 0220) Figure 4003
Locknut (WP 0226, Table 1, Item 39) Qty: 5
REMOVAL
NOTE
All four trough wire channels are removed the same way. Rear trough wire channel shown.
Remove five locknuts (Figure 1, Item 1), washers (Figure 1, Item 2), and wire trough channel (Figure 1, Item
4 ) from studs (Figure 1, Item 3) and frame (Figure 1, Item 5). Discard locknuts.
1, 2, 3
5
4
Figure 1. Wire Trough Channel Removal.
END OF TASK
INSTALLATION
NOTE
All four trough wire channels are installed the same way. Rear trough wire channel shown.
Install wire trough channel (Figure 2, Item 4) on frame (Figure 2, Item 5) and studs (Figure 2, Item 3) with five
washers (Figure 2, Item 2) and locknuts (Figure 2, Item 1).